enable configure terminal hostname R1 enable secret cisco line console 0 password ccna login exit line vty 0 4 password ccna login exit service password-encryption banner motd #Unauthorized access prohibited# interface g0/0 ip address 192.168.1.1 255.255.255.0 no shutdown : show running-config | show ip interface brief Lab 2 – VLANs & Trunking Topology : PC-A (VLAN10) – SW1 (Trunk) – SW2 – PC-B (VLAN10)
interface g0/0.10 encapsulation dot1Q 10 ip address 192.168.10.1 255.255.255.0 interface g0/0.20 encapsulation dot1Q 20 ip address 192.168.20.1 255.255.255.0 : ping from PC in VLAN10 to PC in VLAN20 Lab 5 – Static & Default Routing Topology : R1 — R2 — R3
:
interface range f0/1-2 channel-group 1 mode active interface port-channel 1 switchport mode trunk Topology : PC-VLAN10 — SW1 (Trunk) — R1 (subinterfaces) — PC-VLAN20 enable configure terminal hostname R1 enable secret cisco
ip dhcp pool LAN_POOL network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.8.8 (Packet Tracer only):
:
vlan 10 name Sales vlan 20 name Engineering interface f0/1 switchport mode access switchport access vlan 10 interface f0/24 switchport mode trunk switchport trunk allowed vlan 10,20 : show vlan brief | show interfaces trunk Lab 3 – STP & EtherChannel Topology : SW1 – SW2 – SW3 (triangle with redundant links) Checks : Hello/dead timers, area mismatch, network types,
ip dns server ip host www.ccnalab.com 192.168.1.100 Topology : WLC – Switch – AP – Laptop (wireless)
: NAT not translating. Checks : Inside/outside assignments, ACL permit statement, overload keyword.
router ospf 1 network 192.168.1.0 0.0.0.255 area 0 network 10.1.1.0 0.0.0.3 area 0 (R1 as ABR): Checks : Hello/dead timers
Cisco CCNA 200-301 Practical Lab Guide Hands-On Labs with Packet Tracer
ipv6 unicast-routing interface g0/0 ipv6 address 2001:db8:1:1::1/64 ipv6 enable :
: OSPF neighbors not forming. Checks : Hello/dead timers, area mismatch, network types, ACL blocking.
ipv6 router ospf 1 router-id 1.1.1.1 interface g0/0 ipv6 ospf 1 area 0 Standard ACL (block one host) :
ip route 0.0.0.0 0.0.0.0 10.2.2.2 : show ip route | ping Lab 6 – OSPFv2 Single area :