Horstmann Radio Telemeter Series 2a User Manual Access

| LED State | Meaning | |-----------|---------| | | Powered on, no active transmission, idle mode | | Flashing Green (1Hz) | Normal operation – sampling inputs, no alarm | | Flashing Amber | Transmitting data packet – radio burst active | | Flashing Red (fast) | Low battery or input over-range alarm | | Solid Red | Critical fault (internal memory corruption or radio PLL unlock) | 2.2 I/O Terminal Block (Internal) Remove the four corner screws to access the terminal block. Do not open in a wet or explosive environment.

2A-UM-EN-2024-09 Last updated: September 2024 Supersedes all previous editions. horstmann radio telemeter series 2a user manual

Introduction to the Series 2A The Horstmann Radio Telemeter Series 2A represents a significant leap in remote environmental monitoring and industrial telemetry. Designed for robustness and long-range communication, the Series 2A is not merely a data logger; it is a complete wireless data acquisition system. It transmits critical parameters—temperature, pressure, voltage, flow rates, and contact closures—from remote or hazardous locations back to a central receiver or SCADA (Supervisory Control and Data Acquisition) system. | LED State | Meaning | |-----------|---------| |

Keep this manual with the equipment at all times. Before disposing of the unit, remove the battery and recycle responsibly. Introduction to the Series 2A The Horstmann Radio