Inset Fed Patch Antenna Calculator Direct

If ( R_\textin(0) ) is not known from the exact formula, use the approximation: [ R_\textin(0) \approx 90\frac\varepsilon_r^2\varepsilon_r - 1\left(\fracLW\right)^2 \quad (\textfor thin substrates) ] Given: ( f_r = 2.45 \text GHz ) ( \varepsilon_r = 4.4 ) (FR4) ( h = 1.6 \text mm ) ( Z_0 = 50\ \Omega )

The input resistance from the edge (inset depth) is: [ R_\textin(y=y_0) = R_\textin(0) \cos^2\left(\frac\piLy_0\right) ]

[ W = \frac3e82(2.45e9)\sqrt\frac4.4+12 \approx 37.3 \text mm ] inset fed patch antenna calculator

[ y_0 = \frac28.4\pi \cos^-1\sqrt\frac50297 \approx 9.04 \times \cos^-1(0.41) \approx 9.04 \times 1.148 \approx 10.4 \text mm ]

[ \Delta L = 0.412 \times 1.6 \frac(4.18+0.3)(37.3/1.6+0.264)(4.18-0.258)(37.3/1.6+0.8) \approx 0.74 \text mm ] If ( R_\textin(0) ) is not known from

[ \varepsilon_\textreff = \frac4.4+12 + \frac4.4-12\left(1+12\frac1.637.3\right)^-0.5 \approx 4.18 ]

(using simpler formula for demonstration) [ R_\textin(0) \approx 90\frac4.4^24.4-1\left(\frac28.437.3\right)^2 \approx 90\times\frac19.363.4\times0.58 \approx 297\ \Omega ] Feeding it directly with a microstrip line creates

Use these equations to build your own calculator in Excel, Python, or MATLAB.

1. Introduction A rectangular microstrip patch antenna is one of the most common planar antennas. Feeding it directly with a microstrip line creates an impedance mismatch because the patch edge has high impedance (typically 150–300 Ω), while the feed line is usually 50 Ω. The inset fed (or recessed microstrip line feed) technique solves this by placing the feed point inside the patch, where the input resistance drops to 50 Ω at a specific inset depth.

[ L = \frac3e82\times2.45e9\sqrt4.18 - 2\times0.00074 \approx 28.4 - 0.00148 \approx 28.4 \text mm ]

To match the feed line impedance ( Z_0 ) (e.g., 50 Ω): [ Z_0 = R_\textin(0) \cos^2\left(\frac\piLy_0\right) ] [ y_0 = \fracL\pi \cos^-1\sqrt\fracZ_0R_\textin(0) ]