Leica Disto D510 Screen Replacement Instant

The screen is glued to the inside of the front housing. Apply gentle heat (hair dryer on low, ~50–60°C) around the display window. Use a thin spudger to lift the old screen. Do not bend the front frame – it contains the optical viewfinder alignment. 4. Installing New Screen Step 1 – Clean the mounting surface Remove all old adhesive from the front housing with isopropyl alcohol. Ensure no glass shards remain (risk of puncturing the new flex cable).

Insert the new flex cable into the ZIF connector, ensuring the metal contacts face the correct side (usually downwards toward the PCB). Press the locking bar down firmly. Leica Disto D510 Screen Replacement

Unscrew 2 small cross-head screws holding the metal shield over the display ribbon connector. The screen is glued to the inside of the front housing

Locate the ZIF (zero insertion force) connector for the display. Flip up the brown/black locking bar, then gently pull the flex cable straight out. Do not bend the front frame – it

Apply fresh double-sided tape to the back of the new LCD or to the housing recess.