Tableau Correspondance Carburateur Walbro Apr 2026

If you see a carb with “HDA” cast into the body, search for “Walbro HDA” + your OEM number online. 6. Jet and Nozzle Correspondence When swapping between families, jets and nozzles may be reused:

| Kit Number | Fits Families | Notes | |------------|---------------|-------| | K10-WAT | WT, WA, WYJ, WYL | Includes pump diaphragm, gasket, metering diaphragm | | K20-WAT | HDA, HDC, HS | Thicker pump diaphragm for higher pulse pressure | | D10-WB | WB series only | Smaller diameter |

A WT-215 main jet (#110) will fit a WA-167 but not a WYL-1 (different thread pitch). 7. Gasket and Diaphragm Correspondence Walbro uses two main diaphragm kits: tableau correspondance carburateur walbro

| Component | WT Series | WA Series | WYL Series | WB Series | |------------|-----------|-----------|------------|-----------| | Main jet thread | 5mm x 0.5 | 5mm x 0.5 | 5mm x 0.8 | 6mm x 0.75 | | Idle jet thread | 3.5mm x 0.6 | 3.5mm x 0.6 | 3.5mm x 0.6 | None (fixed) | | Nozzle type | Press-fit D10 | Screw-in D6 | Press-fit D10 | Screw-in D8 |

| Obsolete WT Model | Direct Replacement WT Model | Equivalent in WA/WYL | OEM Application Example | |-------------------|-----------------------------|----------------------|--------------------------| | WT-194 | WT-215 | WA-167 | Stihl 026 Pro | | WT-205 | WT-215 | WYL-1 | Stihl MS260 | | WT-99 | WT-112 | WA-76 | Husqvarna 55 | | WT-118 | WT-215 | none | Echo CS-440 | | WT-110 | WT-199 | none | Homelite XL-12 | If you see a carb with “HDA” cast

| OEM Brand | OEM Part Number | Corresponding Walbro Model | |-----------|----------------|-----------------------------| | Stihl | 1121 120 0600 | WT-215 | | Stihl | 1128 120 0601 | WYL-1 | | Husqvarna | 503 90 87-02 | HDA-199 | | Husqvarna | 501 82 93-01 | WT-112 | | Echo | 14510042330 | WYJ-2 | | Echo | 14510042331 | WT-118 | | McCulloch | 953-020-001 | WA-76 | | Homelite | 694208 | WT-99 |

Float carburetors require a gravity fuel feed or fuel pump; diaphragm carbs can pull fuel from below tank level. 5. OEM to Walbro Correspondence Table Many OEMs stamp their own numbers on Walbro carbs. Use this to find the actual Walbro model: OEM to Walbro Correspondence Table Many OEMs stamp

If the bolt spacing is 32mm center-to-center and bore is 14.5mm, any WT with matching throttle linkage cam will work. You may need to swap the metering lever height (1.3mm below carb body for most). 4. Correspondence Between Diaphragm and Float Type | Diaphragm Model | Float Model Equivalent | Conversion Kit Needed | |----------------|------------------------|------------------------| | WT-215 | WB-3A | Adapter block + longer bolts | | WA-167 | WB-27 | Pulse hose relocation kit | | HDA-199 | HS-262 | None (same body, different bowl) |