Github: X-cube-eeprom

Enter .

Let’s dive into why this library deserves a spot in your toolchain. The x-cube-eeprom repository (hosted on GitHub under STMicroelectronics or community forks) is an expansion software pack designed to simplify non-volatile data storage. While the name suggests a physical EEPROM driver, the core logic often focuses on EEPROM Emulation .

uint16_t data = 0xABCD; EE_WriteVariable(0x0001, data); // Store at virtual address 0x0001 x-cube-eeprom github

Every embedded developer knows the struggle. You have sensor calibration data, device settings, or a transaction log that needs to survive a power cycle. You could use the internal Flash, but that often involves complex unlock sequences, page erases, and the risk of bricking your firmware if you overwrite the wrong sector.

/* Specify the memory areas */ MEMORY { FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K EEPROM (rx) : ORIGIN = 0x08080000, LENGTH = 64K RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K } #include "eeprom.h" int main(void) { HAL_Init(); EE_Init(); While the name suggests a physical EEPROM driver,

Have you used EEPROM emulation before? Run into any issues with page erases? Let me know in the comments below! Happy coding, and may your data persist through every reset!

uint16_t readData; EE_ReadVariable(0x0001, &readData); You could use the internal Flash, but that

Example for STM32F4:

If you haven't stumbled across this GitHub gem yet, you’re in for a treat. This repository provides a hardware-agnostic, lightweight abstraction layer for managing EEPROM (or Flash emulated as EEPROM) on STM32 microcontrollers.

if(readData == data) { printf("EEPROM works like a charm!\r\n"); }