Front Panel Connectors - Foxconn N15235 Motherboard

| Pin | Signal | Typical wire color | |-----|---------------|--------------------| | 1 | HDD LED (+) | Red/orange | | 2 | HDD LED (-) | White | | 3 | Power LED (+) | Green | | 4 | Power LED (-) | White | | 5 | Power Switch | Blue/black | | 6 | Power Switch | White/black | | 7 | Ground | N/A (may be blank) | | 8 | Reset Switch | Blue/orange | | 9 | Reset Switch | White |

Hope this saves someone the headache. Let me know if you have a different revision of this board – yours might differ slightly. foxconn n15235 motherboard front panel connectors

[1] [2] [3] [4] [5] [6] [7] [8] [9] Pin 7 missing? That’s fine – just align the blank spot. | Pin | Signal | Typical wire color

Here’s a forum-style post you can use or adapt for a tech support or build log. Help / Guide: Foxconn N15235 Motherboard Front Panel Connectors That’s fine – just align the blank spot

You’ll need to split the wires or use individual jumpers. Don’t force the connector – you can bend or break pins.

I recently got a system with a Foxconn N15235 motherboard (often found in older OEM builds like certain Acer, Gateway, or eMachines desktops). I had a hard time figuring out the front panel header pinout because the board markings are minimal and the manual is hard to find. After some trial and error, I got it working. Here’s what I found – hope it helps someone else.